|
SAVE MONEY! Only $19.99
No Duct Work Needed! No Holes in your Roof!
Less Labor which means Less Cost! |
 |
Ductless Ventilation Fan
Model No. CBFD00
Bathrooms, Bedrooms, Family Room, Kitchen! |
• Galvanized housing for humid conditions and various attic temperatures
• Built-in mounting tabs for quick installation
• Markings on housing for ceiling/wall thickness
• No duct work necessary
• Built-in junction box for easy wiring
• Replaceable Activated Charcoal Filter
• Easy to remove and replace |
• Easy remove and install motor assembly
• Permanently lubricated motor with plug for quick activation
• Molded fan blade-precision balanced for quiet operation
• Attractive molded grille
• Easy to install and remove
• Spring clips provide film pressure against ceiling or wall
• Dishwasher safe for easy cleaning |
DIMENSIONS
Housing: 7 1/4" x 7" x 3 7/8"
Grille: 8 1/2" x 8 1/2"
RECOMMENDED
1 Ductless Exhaust Fan every 75 Square Feet |
No duct means NO HOLES in your Roof, NO DUCT WORK needed and LESS LABOR which means LESS COST!
How does this Ductless Exhaust Fan work?
Simple. There is no duct assembly required. It recirculates the air in the room, filters it through the charcoal filter, and sends it back out to the room. When the charcoal filter becomes dirty, you can easily remove it and replace it with a new one.
(click here for replacement parts) |
|
 |
 |
 |
Only $19.99
DISCONTINUED
|
| Due to the low profit margin on this item we do not accept returns unless damaged or defective. Please refer to our terms of sale for complete details. |
INSTALLATION NOTES:
1) Attach housing to joist with screws or nails. Housing is stamped to show 3/4" Standard Sheetrock / Plaster and 3/8" Drywall, Adjust Accordingly.
2) Wire with 120VAC - 60Hz power leads, use the appropriate knock-out location on the housing and with an appropriate wire connector (BX or Romex)
3) Remove outlet box cover by removing screw and pulling downward.
4) TURN OFF ELECTRICAL POWER AT SERVICE ENTRANCE!
5) Connect wire from wall switch to motor wires. Use approved wire connectors - white to white, black to black, and green to ground.
6) Replace outlet box cover and screw.
7) Install cover to housing with spring clips and or screw provided.
CAUTION: Be sure all wiring complies with local and national electric codes, and housing is properly grounded.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
1) Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer.
2) Before servicing or cleaning this unit, switch power OFF at service panel and lock service panel to prevent power from being switched on accidentally. If the service panel cannot be locked, fasten a prominent warning device to the service panel (such as a tag).
3) Installation and all electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction codes and standards.
4) Do NOT use this fan with any solid-state speed control device.
5) When cutting or drilling into a wall or ceiling, do NOT damage electrical wiring or other hidden utilities.
6) Ducted fans MUST ALWAYS be vented to outdoors.
7) Never install or place a switch where it can be reached from a tub or shower.
8) NOT for use in kitchens
9) NOT for use with heating equipment, fuel burning equipment or chimneys.
10) This unit MUST be grounded.
11) Keep drywall spray and construction dirt off motor assembly to avoid bearing damage and/or unbalanced impellars. |
| 
|
