Contractors Choice Lighting

Why Buy From Us

Indoor Lighting Menu

Outdoor Lighting Menu

About Us

Contact

Home

Chasing 3-Wire Color Rope Light 148 FT

120v Commercial Grade w/ Diamond Definition		 Click for
Rope Light
Accessories
8 YEAR GUARANTEE or 35,000 hr. LIFE*
OVER 2 MILLION FEET SOLD! and counting...

EACH KIT INCLUDES (GW150-3W-COLOR)
• 148 FEET of 120v clear 1/2" Diameter 3 wire rope light with Diamond Definition
• (3) plug in cords
• (3) plug connectors
• (3) end caps
• IMPORTANT: When comparing prices, please note we give you more
---feet plus the largest amount of free accessories per kit.

Rope Light Available in Blue, Red, Green, Yellow, Purple or Orange

This kit is good if you do NOT plan to cut this rope light at this time, because of the limited accessories it comes with. (You may always buy accessories later to cut this rope light, should you decide to)
LET'S SET THE RECORD STRAIGHT
Click to see why you should buy our rope light!

We do NOT cut rope light. We ONLY offer 148 foot spools.

SPECIFICATIONS
• UL Listed for Indoor & Outdoor Use
• Rope Light is Heavy Duty flexible UV Stabilized PVC 1/2" Round Diameter Tube (We call this our Diamond Definition tube)
• Our EXCLUSIVE rope light tube is the clearest and most impact resistant tube available with a true UV protection
• Bulb Life: 35,000 hours or 8 Years* (NO one else can or will offer this guarantee!)
• Bulbs are spaced 1" apart and are soldered in unison with air craft grade nickel plated material
• Bulbs are resistant to corrosion, impact and moisture with a 8 year or 35,000 guarantee
• Low Energy use, Yet still provides 5.5 watts of light per foot
• Rope Light can be dimmed with proper approved dimmer (click here for our 120v Dimmers)
• Airway channel runs thru the entire tube to allow for an air pocket to help ventilate the bulbs
• We are the ONLY company that can prove that we have sold over 2 million feet of rope light world wide
• We sell so much of it that the factory PROUDLY prints our name on it
• Marked every 48 inches for cutting**
• Simply remove from box and connect directly into a standard 120v receptacle with the included power cord.
• Maximum Run: You can run one complete 148 FOOT spool (make sure your power source can handle the full load).
• Bendable to 160 degrees.

This "CHASING" Rope light will do CHASING effects WITH the use of a CHASING CONTROLLER.

Can be used with NO controller if you just want a steady on light by simply plugging into a 120v outlet.

What is the difference between STANDARD (2-WIRE) and CHASING (3-WIRE) Rope Light? Click Here!
We do NOT cut rope light. We ONLY offer 148 foot spools.

 3-Wire Chasing Color Rope Light


We are the only company that can prove that we have sold over 2 Million Feet of rope light Worldwide!

In fact, we sell so much Rope Light, the factory Proudly Prints our Name on it.
Color Rope LightWhat's the difference between Rope Light and other types of Strip Lighting? Need Help Deciding what to use? Click Here!

Click Here to see our Rope Light in Action!

WHY BUY OUR ROPE LIGHT? Click Here!

ACCESSORIES FOR 3-WIRE ROPE LIGHT ONLY
Timer & Photo Control for Rope Light
PTP09
Timer & Photo Control for Rope Light		 Multi-Plug Hub for Rope Light
PP4X
Multi-Plug Hub for Rope Light		 Dimmers for Rope Light
120v
Dimmers for
Rope Light		 3-Wire Rope Light Effects Controller
RAC3W
3-Wire Rope Light
Effects Controller		 Mini Controller for 3-Wire Rope Light
RA-MC3W
Mini Controller for
3-Wire Rope Light
Plug-in Cord for 3-Wire Rope Light
RA6P-3W
Plug-in Cord for
3-Wire Rope Light		 Power Connection for Rope Light
RAPC-3W
Power Connection
for Rope Light		 Rope Light Splice Connector
RASC-3W
Rope Light
Splice Connector		 Invisible Connector for Rope Light
RAIV-3W
Invisible Connector
for Rope Light		 T-Connector for 3-Wire Rope Light
RATC-3W
T-Connector for
3-Wire Rope Light
Rope Light End Cap
RAEC
Rope Light
End Cap		 1/2" Rope Light Mounting Clip
RAMC
1/2" Rope Light
Mounting Clip		 Mounting Channel for 1/2" Rope Light
RA2C
Mounting Channel for 1/2" Rope Light		 Extension Jumper for 3-Wire Rope Light
RAEJ-3W
Extension Jumper for 3-Wire Rope Light		 Multi Connector for 3-Wire Rope Light
RAMTC-3W
Multi Connector
for 3-Wire Rope Light

Important Note: All rope light is non-returnable unless damaged or defectve. This insures that everyone receives brand new rope light as there is no way for us to determine whether the product has been used or not. To report damaged or defective rope light, click here to fill out our Online Claim Form.

A Rope Light guide, tips and help before you buy.


Search CCL:


When buying from Contractors Choice Lighting, your ID is protected and your purchases are secured.
Proud affiliates of Consumers Choice Lighting
Legitimacy, Integrity, Honesty, Security, and Peace of Mind with Contractors Choice Lighting

Why Buy From Contractors Choice Lighting? Contractors Choice Lighting Gives Rope Light Back to Charities! You've Seen the Light! Protect Your Investment with Contractors Choice Lighting Rope Lighting Tips from Contractors Choice Lighting


* 8 Year Guarantee is on the tube only not to UV Tarnish or Degrade unless exposed to high heat temperatures or harsh water conditions. This guarantee will also NOT cover Physical Damage.

The bulbs come with a 35,000 hour life rating. This rating is a factory provided hour long rating and is determined by laboratory conditions. We do NOT guarantee that they will last for 35,000 hours. Any company that does is giving you false imformation as this would be impossible to guarantee. However, we do guarantee to replace the product for up to 1 year after the purchase date - any section(s) that go out.

** The cut positions are noted every 48 inches and this is only how the factory makes this item for cutting, should you need to. We are NOT recommending, endorsing, approving or indicating that you can safely cut this product or that it is allowed to be cut. We assume no risk, or liability for the use or misuse of this product whether you cut it or not. We are selling you a complete and uncut 148 foot spool, therefore we do NOT include any cutting instructions. Should you decide to cut on your own, you will have to use common sense by simply viewing the items it comes with, such as the end caps, splice connectors, etc. Once you have these items, it's like putting Lego blocks together - very easy to figure out. Please keep in mind, this is a 50 year old design and there has never been any issues if you use common sense.

Terms and Conditions | Privacy Policy © 1999-2007, CCL, Inc. All Rights Reserved.
Any unauthorized duplication or attempted duplication in full or in part of any content from this
website is strictly prohibited and will be prosecuted to the fullest extent permitted by law.