|
FOR INDOOR USE ONLY
INSTALLATION INSTRUCTIONS:
1) WARNING: TURN OFF ELECTRICAL POWER AT CIRCUIT BREAKER OR FUSE. Test that power is OFF before wiring! Avoid shock, fire or electrocution.
2) Open package, remove fixture and hardware. Snap-off decorative faceplate.
3) Verify fixture will fit your Junction Box and knock-out appropriate screw mounting holes.
4) Remove existing wallplate and outlets.
5) With wire strippers, strip wire insulation to expose 3/4" bare copper at the end of each circuit lead. Insure that ends of wire are straight.
6) Connect wires per Wiring Diagram (shown above). Twist together the bare ends of the appropriate wires. Push wires firmly into the wire connector. Screw connector on clockwise until tight and no bare copper is exposed. Secure connection with electrical tape.
7) Mount fixture to junction box with the screws furnished. Snap-on decorative faceplate.
8) Restore power at the fuse or circuit breaker.
IMPORTANT NOTE
Please read ALL safety precautions and installation instructions carefully before installing or servicing this fixture. Failure to comply with these instructions could result in potentially fatal shock and/or property damage.
IMPORTANT:
Installing this lighting device requires experience with Residential and Commercial wiring practices. It is recommended that all wiring be performed by a qualified licensed electrician. This fixture must be wired in accordance with all national and local electrical codes.
CAUTION:
- Do NOT use outdoors. FOR INDOOR DRY LOCATION USE ONLY.
- Do NOT attempt to disassemble or repair.
- Turn OFF power at circuit breaker or fuse when changing bulbs or servicing fixture.
- Clean outer surface with clean damp cloth ONLY. Do NOT use soaps or cleaning liquids.
WARRANTY:
This product has been carefully manufactured and inspected, and warranted to be free from defect of workmanship and materials for a period of 5 years to the customer when used as intended. Bulbs included with products are not covered under this warranty. Any use or misuse contrary to normal operation shall void this warranty. Under this warranty, we are be limited to replacement of this product within 5 years of date of your order. We are not liable for any damages, whether direct or consequential. We will also not liable for any labor charges in connection with warranty problems. |
PLEASE NOTE
All of the above information is provided to you simply as a courtesy. We are not licensed contractors and are NOT on your job site, therefore we do NOT endorse, recommend or guarantee any of the above information in any manner. We are NOT responsible for any wiring information, the type of wire or cable you use or anything regarding installation of this item. We highly recommend consulting with a licensed electrical contractor before purchasing your lighting. We can NOT be held liable for any use or misuse of the information above.
If you still feel the need to contact us regarding any technical support for your landscape lighting, please click here first. |
« Return to Product
| 
|
