MORE INNOVATION FROM CCL Another "Do The Job Right" Product by CCL!
PATENT # 78640779
INJECTASEAL IS A REGISTERED TRADEMARK OF CCL INC.
PROBLEMS: One of the largest problems with close to the ground outdoor lights, such as Spot / Flood lights and in ground Well lights is premature socket and pre mature bulb failure caused by moisture that gets INSIDE these lights. Not to mention the extra moisture build up on the inside part of the glass. Other factors that may cause this failure are insects and salt air, sprinklers and humidity that can also get inside these lights.
SOLUTION: To help reduce these problems we now offer what we call Injecta-Seal™. HOW IT WORKS:-Without disclosing to much to our so called competitors, we inject key areas of our selected lights with our own special ordered exclusive sealant.
THE SEALANT: Our sealant is specially manufactured for us, right here in the USA, by a private company. We approached this company with our needs and they designed this sealant specifically for our light fixtures. You can't buy this sealant of the shelf! (Scroll down or click here for details on the sealant and the company that makes it specially for us.)
Note: We and many other suppliers & manufacturers have sold thousands of fixtures for years without this option with no serious problems. This is only an option. We do highly recommend it only for the following conditions/environment: Salt air, High humidity, extra normal exposure to sprinklers, rain, damp or moist conditions, or if you simply want that extra peace of mind by knowing you have maximized the life of your fixture, socket, bulb and glass for what ever environment or condition your fixture is in. Please keep in mind that we do NOT add InjectaSealTM into-the cost , causing you to pay more for something you may not need or want. Making it YOUR choice WITH INJECTA SEAL YOU GET PEACE OF MIND Due to the process of InjectaSeal, it may delay your order approx. 1-2 days.
The Manufacturer of our Exclusive InjectaSeal Sealant
THE COMPANY: We are a consulting and manufacturing firm focusing on products and technology. Everyday we manufacture customized formulations of specialty silicone adhesives, sealants, gels and coatings for our customers. With over 50 years experience, our mission is to help our clients by solving problems. We are located in northeast xxxxxx, close to all major raw material suppliers and transportation centers. We offer consulting and specialize in customized formulations of specialty silicone adhesives, sealants, gels and coatings. We work in partnerships with the customer to provide custom formulations to meet their previously unmet needs and their specialized performance and process requirements. We also offers our own line of high performance products including 1 and 2-part RTV's utilizing both addition and condensation cure systems which meet or exceed industry standards. We do not compete with major suppliers offering offsets to existing, generic adhesives. We only offer high tech products for specialty applications. We are technically competent, interested in your application, responsive to your timetable for development and are able to promptly supply production quantities. Also, product testing with in-depth technical support is available from our laboratory and production facility in xxxxx, USA. This new facility features three laboratories to enable separate labs for R&D, QC and Processing Technologies research. Our technical staff have over 50 years technical experience in adhesive development, manufacturing and application technology. The most up-to-date technologies are used to produce state-of-art formulations for fast curing and fast onset of adhesion, custom rheologies and high performance adhesive sealant systems.
THE CHEMIST: Mr. David H. Brassd Association of Consulting Chemists and Chemical Engineers CERTIFICATE NO. x184x Technical Societies: American Chemical Society, American Society of Testing and Materials, Society of Automotive Engineers, Chemical Consultants Network. Previous Experience: General Electric Company, Silicone Division 19xx-19xx Manufacturing, Process and Quality assignments; Loctite Corporation, Automotive and Consumer Group 19xx-xx Product Development Chemist, 19xx-xx Senior Chemist, 19xx-xx Section Head Automotive Product Development; May National Associates, 19xx-xx Technical Director; Dexus Laboratories 19xx-xx Director of Research and Development. Publications: Four papers and several presentations in national and international conferences in the areas of instrumentation, gasket and silicone technology. Laboratory Facilities: Product and process development as well as physical testing labs on premises. Scope of Activities: Silicone consulting to include: Rapid new product development of high strength - fast cure - very high temperature resistant products, troubleshooting process and manufacturing issues in both batch and continuous systems, scale-up and pilot plant manufacturing, test method development to simulate actual manufacturing conditions, streamlining production operations, custom synthesis, sourcing and coordination of custom toll manufacturing, establishing quality systems and product field testing. Focusing on automotive, consumer, industrial and healthcare. Specializing In: Custom formulating in silane and silicone chemistry products areas including: sealants, adhesives, silane adhesion promoters, coatings, siloxane fluids and polymers, low compression set rubber gasketing, heat cured rubber, treated fumed silicas, crosslinkers, thixotropes, encapsulants, thixotropic and self-leveling mold-making compounds, silicone tubing, construction caulking, high tear rubber, automotive fluid resistant gasketing, silicone testing technology, plasticizers, lubricants, both condensation and addition cured one and two-part RTV's, high performance elastomers, adhesion to unique substrates, and customized product rheology. Mr. David H. Brassd is an international consulting chemist specializing in silicone technology. He has spent over twenty-five years in the silicone industry, addressing all phases of research, development, marketing, processing, manufacturing, quality and customer applications. His new technologies and specialty applications can be found around the world. Mr. David H. Brassd is a recognized expert by the Teltech Consulting Network in general silicones, high performance silicone adhesives, sealants, polymers, RTV’s, tubing and heat cured rubber. The scope of his activities includes: custom formulating, seminars, customer applications, process troubleshooting and establishing test methods. His main focus is on the consumer, automotive, and industrial markets. Property enhancement capabilities include: high temperature, adhesion to unusual substrates, high strength, low compression set, rheology modification, and very fast cure speeds. His work history includes being the Section Head of Automotive Silicone Product Development for Loctite leading a staff of eight within the R&D effort. Prior positions at Loctite included: Process Chemist, Product Development Chemist and Senior Chemist. At General Electric Silicones his hands-on experience in quality, processing and manufacturing functions include working with: silanes, greases, silica's, 1 & 2 part RTV’s, polymerization and custom synthesis. Additionally he was Technical Director for May National and Director of R&D for Dexus Laboratories. Mr. Brassd holds a B.S. degree in Chemistry from Regents College at The University of the State of New York, Albany. He is a member of American Chemical Society, SAE, Association of Consulting Chemists and Chemical Engineers, Consulting Chemists Network and ASTM. Publications and Patents Presentations in national and international conferences in the area silicone technology have been offered. Patents have been issued in silicone specialty areas. Mr. Brassd has recently hosted a roundtable discussion at the International Silicone Conference in xxxxx, 200x and presented a paper at the conference in 200x, as well as the Adhesives and Sealants Council in New Orleans and the American Chemical Society, Rubber Division meeting in Cleveland, both in xxxx, 200x. He has also been a member of a recent Deparment of Defense Think Tank in California. An article by Mr. Brassd was published in Rubber and Plastics News in xxxxxxx, 200x and Adhesives Age in xxxx, 200x. He was also the past chairman of the xxxxxx Symposium, as well as chaired seminars through the University of Wisconsin at Milwaukee. Mr. Brassd has presented papers at the American Chemical Society, Society of American Engineers, Boston Rubber Group, Adhesives and Sealant Council, and presented many in-company seminars on specific aspects of gasketing, and silicone technology. -------WITH INJECTASEAL YOU GET PEACE OF MIND!
