|
SAVE TIME AND MONEY WHILE GETTING THE RIGHT ITEM!
 |
Stop the Guessing Games! Take our lights for a Test Drive!
Would you buy a car without driving it first?
|
|
|
| HOW IT WORKS |
12 Volt Kit Shown Above
KIT INCLUDES:
- FIXTURE: 1 Pagoda fixture of your choice (stake included on certain pagoda fixtures - click on a fixture thumbnail image above to find out if it comes with a stake)
- BULB(S): Your choice of how many and what type of bulbs
(NOTE: The PA350, PA351, PABA3T and PABALH in 120V do NOT come with bulbs. These fixtures have a medium base socket that will take a standard A Bulb that can be found in any store)
- MARKER FLAGS: You choose the amount of flags you need
- COMPONENTS (12 Volt Kit):
- 60 Watt transformer with about a 31 foot Plug-in cord (for Outdoor Temporary Use Only**)
(You may need to provide an extension cord should your nearest receptacle be further than 31 feet away)
- COMPONENTS (120 Volt Kit):
- 15 foot Plug-in cord
(You may need to provide an extension cord should your nearest receptacle be further than 15 feet away)
|
CLICK ON IMAGE OF A FIXTURE BELOW
FOR DETAILS OF THAT FIXTURE |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
|
ONLY THE ABOVE FIXTURES ARE AVAILABLE WITH THIS SAMPLE KIT
You will be asked to choose
your fixture when ordering. |
CLOSE-UP OF FLAG
Use this space provided to mark
your desired bulb, or to write in your
company's name or any other
information you need to remember
about the specific location |
|
|
|
 You choose the fixture you want to test!
Not only will you be able to see if the fixture type is what you need, you will also be able to see a sample of the "actual" finish in your hands. As an example, should you choose a Rust Fixtures as a sample, and you may not like the actual color in person, this gives you the opportunity to try another color. This will also allow of course, regardless of the finish, to see if the actual fixture itself will work for your application, (ie. you may need a well light instead of a spot, or you may not need the glare shield style, etc.) |
|
 You choose the bulbs you want to sample with the fixture you chose!
Giving you the ability to decide on which type of bulb will best work for you, (ie. spot, flood, wide flood, wattage, frosted, brightness, etc.) |
|
 You choose the amount of marker flags!
The marker flags are going to be your best friend because they will eliminate the miscommunications or errors which commonly occur when laying out a lighting plan. These flags will save you time and money! Each flag has a blank writing space allowing you to simply label each flag with the fixture and bulb you choose for that location. When done labeling, easily stick the self-staking flag in that specific location! Once you're ready to install all your fixtures, just replace each flag with the matching fixture & bulb that you noted on that flag. We suggest getting extra flags incase you decide later that you want to try more locations. |
|
 Now you're ready to use your kit!
A) Once you receive your fully assembled kit, simply place the fixture at the first item/area you want to illuminate.
B) Now plug in the kit to the nearest receptacle. We suggest that the receptacle you will be temporarily plugging this kit into be a grounded GFI type. The kit comes with a total length of 31 feet (for the 12v kits) or 15 feet (for the 120v kits). If you need more to reach the nearest receptacle, you will need to provide an extension cord. Remember: This kit is for Temporary Use Only as this kit is made up of wire nuts, electrical tape and a non water-type transformer to simply sample / preview the fixture and bulb's performance.
C) Once you have decided which bulb performs to your needs at this location, simply mark that information on one of the flags, and insert it into that location for future reference.
That's it! Now you can go to your next location and repeat the steps. Keep in mind - The amount of steps you can achieve with flag markers will depend on the amount of flags you buy. |
|
|
|
|
Model No. SKIT4
Our normal minimum order amount of $100.00 is waived when purchasing sample kits.
|
|
|
* (NOTE: The PA350, PA351, PABA3T and PABALH in 120V do NOT come with bulbs. These fixtures
have a medium base socket that will take a standard A Bulb that can be found in any store) |
|
Although this kit is non-returnable, you may still be able to use it
for another project whether or not you decide to make a final purchase. |
|
** This kit is for TEMPORARY USE ONLY. It is NOT intended to be used as a permanent fixture. It is
also not to be used in rain, underwater or any area exposed to water. We are not responsible for
the use or misuse of this kit by using it in any manner. |
| 
|
